fbpx
30 Jul 2019

Early Signs That Show Your Property Needs Rewiring

Did you recently buy a property that is need of renovations or do you suspect the electrics in your existing house have become outdated? Either way, it is about time you considered rewiring your premise. Not only are modern properties vulnerable to electrical problems caused by old and faulty wires, but old building might also need fresh wiring to make sure all electrics are safe to use. All new rewiring needs to comply with the electrical safety regulations mentioned in the Part P of the building regulations and it is a compulsory responsibility of property owners to ensure all wires are safe and secure.

If any of the following conditions are true, it is vital that you take action immediately to avoid potential injury or financial loss:

  • The property is over 25 years old.
  • You depend upon extension cords for power.
  • Damages or cracks are visible within the property.
  • You use two prong sockets.

Read on to find out more about the early signs that show your property needs rewiring.

Early Warning Signs

Before you begin to examine the wiring in your home, it is crucial to stay safe and secure. Not many of us are aware of the electrical work, which is why it is necessary to call a professional rather than rewiring your premise yourself. It is highly recommended to keep an eye on the early warning signs that showcase a need for rewiring your premise. To start off, take a look at every room and count the number of sockets in every room. If there are only one or two, this means the building most likely has old and faulty wiring, which needs to be replaced instantly.

Another sign to watch out for is when you touch a socket and it feels hot, this means there’s an overheating taking place somewhere. It is unusual to observe flashing light from a plug or feel a socket heat up or smell peculiar burning smell within your premise. What’s more, don’t forget to take a look at the fuse box in your home. You will be able to identify whether it is made of an older design, judging by its current condition. If in case the fuse box is updated, this is not an indication that the entire property has been rewired.

Take a closer look at the fuses in the box, if they are the re-wirable kind, then it is most like you have an old domestic wiring system that needs immediate attention. A good indication for rewiring is by checking the general condition of the plug sockets and the light switches. If there are any damages such as expired fittings, loose boxes or live wires, you will need to take action today. It is highly recommended to carry out a detailed Electrical Installation Condition Report, which will highlight the necessary damages caused to the wiring hidden behind the walls.

Never take electrical work lightly. It is always best to contact a professional electrical contractor like ourselves when it comes to rewiring your premise.

01 Jul 2019

Top 10 Energy Saving Tips That Will Amaze You

The primary step that many homeowners consider when reducing energy costs is to switch energy suppliers or turn down the thermostat. However, with the increase in the prices of energy stated by leading energy companies such as npower, SSE, British Gas and Scottish Power, switching energy suppliers might not be cost-effective after all. Take a look at these top 10 energy saving tips that are not well-known but highly effective when it comes to saving big on gas and electricity.

Purchase a Halogen Oven

Did you know that a halogen oven can roast a chicken in just 30 minutes and uses only 75% less than a traditional electric oven? Combine this minimized usage of energy with the fast cooking time, you will experience a huge reduction in your bills.

Close Your Chimney

It is estimated that about 80-90% of heat generated from burning wood in the fireplace is mostly lost through open chimneys. Therefore, an unblocked chimney can mean hundreds of pounds being flushed up the chimney every year.You can either cap it or block the cavity with an inflatable chimney balloon, if you use it occasionally.

Set up a Voltage optimisation Device

The variation between the voltage supplied to your home and the amount consumed by your appliances shows that a typical appliance uses 4% more current and 9% more energy than required. According to Evo Energy, installing a voltage optimisation device will save up to approximately 10% on your bills. This device will need to be installed by a professional electrical contractor. Keep in mind that it won’t work on immersion heaters, showers, ovens, hobs but it will function effectively for appliances such as tumble driers, dishwashers, televisions, washing machines and lights.

Install a High-Power Shower

Rather than filling a bath with water, install high-power showers, which use the similar amount of water in only five minutes. Were you aware that faucet aerators and energy-efficient shower heads reduce the amount of water transported from shower heads and taps by 50%, allowing you to enjoy a refreshing shower at the same time.

Insulation for Cavity Walls

Is your home uninsulated? Did you know that you can lose up to 35% of heat through walls if your home isn’t insulated. For example, if you own a standard three-bedroom semi with cavity walls and consider insulating your home, you can save big on heating bills – almost up to £140 each year. Several energy suppliers provide grants that pay for insulation.

Draught-proofing

This is considered as one of the most efficient and cost effective ways to reduce energy costs, but unfortunately, it is commonly overlooked. According to the Energy Saving Trust, you can save as much as £55 every year by simply sealing your windows, loft hatches, pipework and doors.

Fixing Solar Panels

Even though government subsidies tend to fall for solar panels, but so are the costs of installation as well. Solar panel installers are coming up with ways to make installations cost effective and a fruitful consideration since it can save up to each year on energy bills.

Insulation for Lofts

Getting your loft insulated can save about a quarter of heat, which is generally lost through uninsulated roofs. The suggested level of insulation is generally 270mm.

LED Lights

Replacing traditional incandescent lights with LED lights can help you save big on electricity bills. LED lights are becoming popular amongst many property owners since 40% of the total load is used up by lighting fixtures.

Other Essential Everyday Energy Saving Tips

Apart from the above tips, you can also save energy by performing certain everyday tasks such as reducing the heating by 1C, switching lights off when you are in a particular room and boiling water only when you need it. Sometimes, it is the small things that create a big impact on your electricity bill.

02 Jun 2019

How to Save Energy by Using Smart Lighting Solutions

A foremost concern that many homeowners have is about saving energy costs. With the rise of the internet of things (IoT) architectures, smart lighting technology has truly revolutionised the use of energy. According to Gatner, it is estimated that 46 million units were installed in 2015 and this will increase to 2.54 billion units in 2020. Smart lighting involves connecting the light system with a network, which can be monitored and controlled through the cloud or a centralised system. What’s more by installing smart lighting technologies in your property, you can increase its value up to 38%.

How Does Smart Energy Technologies Work

The key factor in smart energy technologies is integration, which enables devices installed around your home to communicate and activate each other. For example, you can switch on the heating in your home by using Nest, an app-enabled thermostat, which senses your exit from work. It also alters the temperature based on usage and peak times. You can adjust your smart lighting solutions according to the time of the day, the number of occupants in the home or the weather outside. Furthermore, you can integrate your window blinds with your lighting solutions, enabling them to be lowered once the sun sets and automatically switching the lights as well.

In order to effectively reduce lighting expenses, it is vital that all five phases of smart lighting is installed, which includes LED lighting, sensors and controls, connectivity, analytics and intelligence.

Smart Lighting Solutions – LED Lights

Several offices and commercial facilities have hundreds and thousands of lighting fixtures installed and this represents at least 40% of the total load. Therefore, by replacing traditional incandescent, fluorescent lighting systems or halogen incandescent with LED lightings, commercial property owners will experience a drastic drop in energy and maintenance costs. LED lights are much more efficient than traditional incandescent lights because the former loses about 90% of energy in heating the bulb and a small fraction goes to generating light. In addition to this, LED lights have a lifetime of about 50,000h in comparison to incandescent lights that have 200h. Therefore, LED lights are affordable and attractive due to their minimum maintenance costs and direct energy savings.

Lighting Controls

It is through lighting controls that makes the entire smart home technology function as it integrates the devices with a centralised system, which can be monitored and controlled. A few examples of energy-efficient control solutions are:

  • Lighting control circuit breakers
  • Occupancy/vacancy sensors
  • Personal dimming controls
  • Daylight harvesting sensors
  • Plug load control

Lighting controls help keep a track of the energy usage within your home. This involves turning off lights in rooms that are vacant or minimising the amount of energy consumed in order to light up a particular space. The effectiveness of lighting controls for energy saving is based upon area utilisation rate and the particular applications. For example, if a room is occupied 100% of the time, it is unlikely that occupancy/vacancy sensors will be able to decrease energy use.

What do you think about smart lighting solutions? Do you have any smart lighting solutions installed in your premise. If not, we can help! Call us today to know more.

02 Jan 2018

Everything You Need to Know About Part P of Building Regulations

Before hiring a contractor for electrical repairs at your home or office, you need to consider a couple of things that will save both money and time. What’s more, you need to be aware of all the details mentioned on the Part P of Building Regulations for electrical safety in UK which many homeowners are unaware of.

BUILDING REGULATIONS AND PART P:

Part P of the building regulations is a legal obligation for all tasks related to electrical installations in houses, flats and offices that are associated or shared with other flats or offices in a building. It also covers areas such as greenhouses, garden lighting’s and separate garages.

Whether you plan to fix all your electrical repairs by yourself or have it done by a professional, you need to notify the concerned authority before setting out to fix any rewiring issues or other electrical installations. If you fail to inform the legal authority, it is most likely they might terminate or alter your work.

PART P CERTIFICATION:

As for the part P certification, you may select from the following four options

  1. Self-Certification Schemes: There is a possibility to self-certify yourself as an electrical contractor if you perform electrical installations as a major activity of your business. Once, you are registered, you are no longer required further notify any authority for the electrical actions you perform.
  2. BCB(Building Control Body): If your electrical installations are infrequent and are only being performed as a supplementary tasks to your main activities, and you are not interested in being registered, then you may have to notify BCB before commencing your work. Above all, you should be able to meet all the requirements related to design and safety. The BCB will then take care of everything else on your behalf for which you will have to pay extra charges.
  3. Third Party Certification: Some people hold third party certification to offer to other clients who want to perform electrical tasks. Although the third party is not the actual electrical contractor, which performs your repairs, they facilitate certifications and conformity towards the requirements of installations and safety for the electrical contractor. That is, if they are not registered with a competent person self-certification scheme. You may consult with them before carrying out any electrical work.
  4. Notifying Local Authority: If you do not want to select the third party certification or the self-certification schemes, you can simply notify the local authority and they might hire electrical inspectors for the purpose who will decide on which option would be appropriate for the work.

WHY IS IT IMPORTANT TO CONSIDER THESE REGULATIONS?

According to a research, 30% of the accidents caused by bad electrical installations through these regulations could have been prevented. Hence, reducing the annual injuries and deaths leads towards an overall growth in the quality of electrical operations.

So, what are you waiting for?! Here’s a smart solution available to you right at your doorsteps! We will make sure you get the electrical work done in the safest way. Remember, safety always comes first! If you need any more info on part P regulations feel free to contact us at Fylde Coast Re-wires where we would be happy to direct on the correct procedures, as a registered company that can certify our own work we are well placed to provide you with guidance.